2 Ton Electric Chain Hoist for Gantry Crane

High-Quality Electric Chain Hoist for Crane UseBrief Introductions:A chain hoist is a pretty simple device considering a large amount of weight such a tool can lift. Chain hoists are made from durable, high-grade steel to ensure safety and reliability when lifting a couple of tons of heavy loads. Manual chain hoist can be separa

Featured Products

High-Quality Electric Chain Hoist for Crane Use

Brief Introductions:

A chain hoist is a pretty simple device considering a large amount of weight such a tool can lift. Chain hoists are made from durable, high-grade steel to ensure safety and reliability when lifting a couple of tons of heavy loads. Manual chain hoist can be separated into three different parts categories: lifting chains, lifting mechanism, and hooks.

Chain hoist has got two chain loops - hand chain and lifting chain. The hand chain sits on a wheel located in the lifting mechanism, it needs to be pulled by hand in order to lift a load. The wheel inside the lifting mechanism has got special pockets that allow the hand chain to move the wheel. Lifting chains also loops the lifting mechanism and lifts or lowers a load. At the end of the chain there is a grab hook, where you can attach lifting chains or slings, a load leveler or load itself. There is also a hook on the top of the chain hoists housing. This hook is used to attach the hoist to a ceiling mount, trolley system or other construction that can withstand the weight a hoist will lift. Most chain hoists have swivel hooks, meaning that they can be turned 360 degrees around to allow for easier mounting. The lifting mechanism consists of a cog, axle, drive shaft, gears and sprockets. There is also a chain stopper or brake on most chain hoists that prevents load from lowering under a load.

2 Ton Electric Chain Hoist for Gantry Crane


2 Ton Electric Chain Hoist for Gantry Crane

2 Ton Electric Chain Hoist for Gantry Crane


 
Capacity
(Ton)
A(mm)B(mm)R(mm)T(mm)Volt(v)Frequency
(hz)
Power
(Kw)
I-beam
(mm)
0.5196248142159110/220
240/380
415/440
50/600.270-210
13152121422310.4
23252201422310.4
33402501422310.4
54002911422310.75
7.54002911422310.75
105003701422310.75

Typical Applications:

2 Ton Electric Chain Hoist for Gantry Crane
2 Ton Electric Chain Hoist for Gantry Crane


How a manual chain hoist works

The physics behind a chain hoist are very simple and have been used for lifting heavy objects for a long time. Chain hoist uses a mechanical advantage to transform small force over a long distance to large force over a short distance, this is possible by using multiple larger and smaller gears in the chain hoist mechanism.
To lift a load, chain hoist operator needs to pull down the hand chain, this turns the cog and axle which goes trough the lifting mechanism. Inside the lifting mechanism are multiple gears which increase the mechanical work applied when pulling the hand chain for dozen times using gear ratio, allowing to easily lift loads with multiple ton capacity.
So when the hand chain is pulled, the cog which is rotated by the hand chain turns the drive shaft and gears which turn the load chain sprocket, this also rotates the load chain that is looped over the load chain sprocket and lifts a load. Larger gears move slower than smaller gears, but create more force, this is why chain hoist lifts load very slowly when compared to a hydraulic hoist. At the end of the lifting chain is a grab hook, which allows to easily attach and detach a load. Also, most chain hoist lifting mechanisms have a ratchet or braking system that prevents the load from slipping back, but allows to lower a load by pulling the other side of the hand chain.


Workshops Show:

2 Ton Electric Chain Hoist for Gantry Crane



















 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours